Simex buckets for demolition and recycling

Simex buckets for excavators

From crushing to selective separation, from volumetric reduction to screening, Simex has a range of buckets for excavators that facilitate demolition and recycling operations, directly on site, of waste material from construction sites and excavations.

  VSE – Screening buckets
© Simex srl

VSE – Screening buckets

Available in 6 models, for excavators from 1,5 to 45 tons, Simex VSE screening buckets are specifically designed for separating different-sized materials directly on-site.

 

Fit: The screening tool system

Screening tool system
© Simex srl

Each element is composed of independent parts, designed to easily interlock with each other, with no weldings. Easily replaceable without difficult operations and without the need of shafts unstrapping: this means up to 75 % maintenance costs, since it is possible to replace even just one single disc or blade. The system allows multiple configurations depending on the materials to be screened.

Instand adjustment of output size

Moving shaft technology
© Simex srl

Big VSE models feature the instant adjustment of output size, via an instant control in the cabin: this exclusive patent allows the shafts to be instantly distanced and closened, with a maximum travel of 40 mm, producing 3 different output sizes with the same bucket, with no downtimes.

  CBE – Crusher buckets
© Simex srl

CBE – Crusher buckets

Designed to reduce the volume of aggregates directly on site, CBE crusher buckets for excavator provide optimal performance when working with iron, rock, soil (even humid or wet), wood and deformable materials, thanks to the rotor system.

Demolition process
© Simex srl

Rebar, in demolition process, tends to get tangled making the loading phase and the subsequent crushing even more complex. Thanks to the rotor system and to the automatic drum inversion system, CBE buckets are unaffected by the presence of iron rods inside reinforced concrete.

  CBA – Asphalt granulator bucket
© Simex srl

CBA – Asphalt granulator bucket

CBA asphalt granulator buckets are specifically designed for the volumetric reduction of asphalt slabs directly on site. The rear grid determines the grain size of the output material and is available in several configurations, to meet the different characteristics required for the milled material by the regulations in force in various countries.

Recovering material deriving from demolition and scarification
© Simex srl

In the world of road maintenance and paving the issue of recovering material deriving from demolition and scarification is becoming increasingly urgent, with the dual objective of combining environmental protection with economic savings. Road paving can be recycled several times, in full compliance with the regulations in force.

https://simex-buckets.com/en-gb/

https://www.simex.it/en-gb/