Tsurumi

Demo pump to steal the show

Tsurumi provides a real proof of performance at stand A6.338: the KRS2-80 pump on display has run for 20 000 hours without maintenance.

Tsurumi's slogan "Stronger for longer" seems appropriate: This KRS2-80 has run as a demonstrator for 21 years without any maintenance and will also be on display at bauma 2022
© Tsurumi

Tsurumi's slogan "Stronger for longer" seems appropriate: This KRS2-80 has run as a demonstrator for 21 years without any maintenance and will also be on display at bauma 2022
© Tsurumi
The manufacturer set this record quite incidentally. The pump is the company's own demonstrator for the series. It was put into service in 2001. It was only after 21 years that the first service was carried out – purely as a safety measure in the run-up to the trade fair, so that nothing would go wrong. Unfounded, as it turned out: Only a seal and small parts were replaced. The pump series is one of the most frequently built by the manufacturer and is designed for water containing mud or sand. It moves about 1700 l/min or pushes water up about 16 m. The water may contain stones with a diameter of up to 30 mm. The pump can be seen in a live wet operation at the stand.

And should it fail, Tsurumi will have a workbench on site as a novelty for visitors to the fair. Pump technicians will use it to demonstrate how to service a pump. Visitors are invited to join in.

And yes: Tsurumi will also be presenting innovations in 2022. Among other pumps, the company will showcase the KRDX. This is a completely new series of safety pumps that are approved according to IECEx and ATEX. The company will also be showing the digital Tsurumi Connect system for seamless monitoring of pumps and other machines, even those from other manufacturers. Operators can use it to determine the location of their machines, read out performance data or define alarm and failure scenarios. If water should leak somewhere, the new LSC2.75S can certainly help: This residual water pump even dries out puddles – proof will be provided at the stand.

Hall A6, stand 338

www.tsurumi.eu


Related articles:

Issue 10/2022 SPECIAL bauma 2022

Tsurumi (Europe) GmbH

Tsurumi will be lifting the veil on its new safety pumps at bauma 2022 and show visitors how to service a pump properly. For the first time, the exhibitor is coming to bauma with a workbench where...

more
Issue 03/2019 Tsurumi

Tsurumi

N?o two construction projects are the same, which also applies to the dewatering systems. Two new pumps by pump manufacturer Tsurumi offer greater scope to come up with ideal solutions. They will be...

more
Issue 04/2024

Tsurumi (Europe) GmbH

At the IFAT pump manufacturer Tsurumi will be showcasing new products including its CZ waste water pumps and MMR submersible mixers. „Smart“ is the Connect system that connects, monitors and...

more

Dewatering pumps: Tsurumi's best-sellers

Which pumps do companies rely on when it comes to removing dirty water? The pump manufacturer Tsurumi has taken a look - these are the best-sellers of 2022. Moving water from A to B: What seems...

more

Chromium impellers at Tsurumi

Pump manufacturer Tsurumi is equipping several pump series with ultra-hard chromium impellers free of charge. A technical step forward for users, because with many manufacturers the critical component...

more